Call 08046058025 77% Response Rate

Send Email

Rotary Joints

As an ace manufacturer and supplier of Rotary Joints, we have marked our name very strongly in the market. Rotary Joints allow the feed through of water, glycol, air, hydraulic, coolant, MQL, hot oil, steam, vacuum and a variety of other media. Rotary Joints can be configured for installation at the end of a shaft or around-the-shaft. The housing has an inlet port, which is a threaded port to which the hose supplying the medium will be attached.
Paddle Dryer Rotary Joint

Paddle Dryer Rotary Joint

Product Price: Rs 2,500 / PieceGet Best Price

Product Details:
ConnectionMale
MediaOil, Water, Steam
MaterialStainless Steel
Size3/4" to 4"
BrandCarbon Rotofluid
Type of FlowDual flow & monoflow
As an ace manufacturer and supplier of Paddle Dryer Rotary Joint, we have marked our name very strongly in the market. These allow the feed through of water, glycol, air, hydraulic, coolant, MQL, hot oil, steam, vacuum and a variety of other media. Rotary Joints can be configured for installation at the end of a shaft or around-the-shaft. The housing has an inlet port, which is a threaded port to which the hose supplying the medium will be attached.

Features:
  • Correct housing
  • Easy to install
  • Enhanced service life

Other details:
  • "Carbon" brand rotary joints are widely used in paddle dryer for heating & cooling application.
Get Best QuoteRequest A Callback
Industrial Rotary Joints

Industrial Rotary Joints

Product Price: Rs 3,500 / PieceGet Best Price

Product Details:
ConnectionMale
MediaSteam, Oil, Water
Max Temperature220 deg C
Size2.1/2" BSP TO 10" BSP
Max Speed20 rpm
MaterialStainless Steel
BrandCarbon Rotofluid
Max Pressure25 bar
This Industrial Rotary joint is a specialized variation, designed for application where the inlet and outer pipe must rotate with the roll on paper machine dryers with rotary siphons, double shell dryers, Rotary steam tube dryers and other similar machines.“CARBON” Brand ‘901’ Series Rotary joints supplied along with the Support stand [at extra cost] only to avoid misalignment and easy for installation to your rotary dryers or rolls.

Advantages of “CARBON” brand 901 SERIES Rotary Joints:

Inexpensive design, since there are bearing less Rotary joints.#The seal rings are made of a special Resin impregnated carbon which requires no lubrication of any sort. Seal rings are resistant to fraction, even at high pressures. The Special design for rotating inner pipe has a seal between inlet and outlet. Maintenance free no lubrication necessary. Support stand [at an extra cost] for prevention of housing rotation as well as hose connections and inner pipe must not interfere with this axial displacement since the rotary joint will otherwise not operate properly.



Additional Information:

  • Item Code: 901
Get Best QuoteRequest A Callback
Custom Made Rotary Joints

Custom Made Rotary Joints

Product Price: Rs 15,450 / PieceGet Best Price

Product Details:
Usage/ApplicationStructure Pipe
Model Name/Number1000
ColorSilver
MediaSteam, Water
Size1/2" to 10" BSP
MaterialCarbon
ConditionNew
BrandCarbon Rotofluid
We are involved in manufacturing & supplying a broad array of Custom Made Rotary Joints which is made of high graded raw materials using advanced technologies. These are well appreciated due to their world class features including seal maintenance without use of any kind of packing, operating pressure adjustment and low lubrication. This range is also customized to meet the special requirements of our clients.

Features:
  • Highly reliable
  • Reasonable rate
  • High performance
Get Best QuoteRequest A Callback
Paper Industries Rotary Joints

Paper Industries Rotary Joints

Product Price: Rs 900 / PieceGet Best Price

Product Details:
ConnectionMale
MediaWater, Steam
MaterialStainless Steel
Max Temperature 270 deg C
BrandCarbon Rotofluid
Pressure250 Psi
We are engaged in manufacturing & supplying a broad array of good quality Rotary Joints which is made of corrosion resistant carbon materials.Paper Industries Rotary Joints are resistant against high temperature and pressure and can withstand temperature of 270 ° C & pressure of 250 PSI of steam. Further, we offer Rotary Joints with the variable size ranging from 1/2" BSP to 4" BSP and use stationary syphon. The threaded rotor of these joints is build in accordance with ISO 228 / NPT / Metric which guarantees high operational performance, durable life and easy usage.

Advantages:
  • Joint Life is extended.
  • Corrosion resistant special carbon seal ring for better life.
  • CARBON seal ring use in diff. grade as per application.
  • Sleeves often reusable reducing repair cost.
  • The hard oxide layer makes the sleeve corrosion resistant.
  • Wear of the sleever is minimized in the seal and bearings areas.

Features:
  • Exceptionally long service without lubrication.
  • Handles a wide range of operating conditions.
  • Reduces expensive downtime with wear indicator.
  • Competitively priced available from stock


Additional Information:

  • Item Code: 301
Get Best QuoteRequest A Callback
Pneumatic Rotary Joint

Pneumatic Rotary Joint

Product Price: Rs 1,800 / PieceGet Best Price

Product Details:
ConditionNew
ConnectionMale
MediaWater, Steam
MaterialIron
Size1" BSP to 6" BSP
BrandCarbon Rotofluid
This range of Pneumatic Rotary Joint is mainly used for steam & water rotating syphon type mechanical equipments. Fabricated from optimum graded carbon materials these are available in 1" BSP to 6" BSP. The threaded rotor in these joints is made as per the ISO 228 or NPT Thread and is offered with optional quick release nipple.

Applications:
  • For Steam & Water Rotating Syphon Type
  • Size:1" BSP TO 6" BSP.
  • Threader Rotor :
  • As per ISO 228 OR NPT Thread
Get Best QuoteRequest A Callback
Hot Oil Rotary Joint

Hot Oil Rotary Joint

Product Price: Rs 3,500 / PieceGet Best Price

Product Details:
Usage/ApplicationGas Pipe
Model Name/Number501
ColorSilver
ApplicationHydraulic Pipe, Structure Pipe
Size2 inch, 3 inch, 3/4 inch, 1 inch, 1/2 inch
BrandCarbon Rotofluid Private Limited
Manufacturing and supplying of supreme quality Hot Oil Rotary Joint has helped us achieve a very high level of trust in the market. It is high on performance, low on complicated usage and extremely affordable on the monetary quotient. It has been constructed under a team of dexterous professionals who do not believe in compromising on the product quality. A cast-iron separator plate fits between each disc. The separator plate locates on driving pins on the flywheel. This friction unit is between the flywheel and the pressure plate when the pressure plate assembly is bolted to the flywheel.

Features:
  • Efficient joint
  • Separator plate
  • Driving pins
Get Best QuoteRequest A Callback
Industrial Series Rotary Joints

Industrial Series Rotary Joints

Product Price: Rs 6,500 / PieceGet Best Price

Product Details:
MediaWater, Steam
Size1" BSP TO 6" BSP
MaterialStainless Steel
ConnectionMale
BrandCarbon Rotofluid
Connection EndThreaded
This range of Industrial Series Rotary Joints is mainly used for steam & water rotating Syphon type mechanical equipments. Fabricated from optimum graded carbon materials these are available in 1" BSP to 6" BSP. The threaded rotor in these joints is made as per the ISO 228 or NPT Thread and is offered with optional quick release nipple.

Applications :
  • For Steam & Water Rotating Syphon Type
  • Size:1" BSP TO 6" BSP.
  • Threader Rotor 
  • As per ISO 228 OR NPT Thread


Additional Information:

  • Item Code: 801
Get Best QuoteRequest A Callback
Rotary Pressure Joint

Rotary Pressure Joint

Product Price: Rs 1,500 / PieceGet Best Price

Product Details:
ConnectionMale
MediaWater, Steam
MaterialIron
Max Temperature220 degree C
Size1/2" to 2"
BrandCarbon Rotofluid
The range of rotary joints which we offer is specially designed for continuous casting machines. Composed of top quality raw materials Rotary Pressure Joint are offered in various types of duo flow & mono flow systems with siphon pipe or center tubes. We offer this range in a variety of sizes, shapes, designs and dimensional specifications according to the diverse requirements of our clients.

Advantages:
  • Bearing less design combines rigidity and low function for long, trouble-free service.
  • Brass housing & brass hose connector and stainless steel rotor to provide the ultimate protection against rust and corrosion.
  • Carbon rotating unions have balanced mechanical seals with seal faces that are micro-lapped to the flatness of better than 2 to 4 light bands which provide the ultimate wear resistance in harsh and abrasive environments.
  • Extra long impregnated bearing to assure easy rotation.
Get Best QuoteRequest A Callback
Pipeline Rotary Joints

Pipeline Rotary Joints

Product Price: Rs 7,600 / PieceGet Best Price

Product Details:
Usage/ApplicationGas Pipe
Model Name/Number102
ColorNickel
Size1 inch
MediaSteam, Water
ConnectionMale
MaterialStainless Steel
BrandCarbon Rotofluid
The range of Pipeline Rotary Joints which we offer is specially designed for continuous casting machines. Composed of top quality raw materials Pipeline Rotary Joints are offered in various types of duo flow & mono flow systems with siphon pipe or center tubes. We offer this range in a variety of sizes, shapes, designs and dimensional specifications according to the diverse requirements of our clients.

Advantages of Pipeline Rotary Joints:

  • Carbon rotating unions have balanced mechanical seals with seal faces that are micro-lapped to flatness of better than 2 to 4 light bands which provide the ultimate wear resistance in harsh and abrasive environments.
  • Extra long impregnated bearing to assure easy rotation.
  • Bearing less design combines rigidity and low function for long, trouble-free service.
  • Brass housing & brass hose connector and stainless steel rotor to provide the ultimate protection against rust and corrosion.
Get Best QuoteRequest A Callback
Multi Flow Rotary Joint

Multi Flow Rotary Joint

Product Price: Rs 8,000 / PieceGet Best Price

Product Details:
ConditionNew
ConnectionMale
MediaWater, Steam
MaterialStainless Steel
Max Temperature100 degree C
BrandCarbon Rotofluid
We are recognized as successful manufacturers and suppliers of Multi Flow Rotary Joint. These products from our side are precision mechanical devices used to transfer fluid from a stationary source, such as a supply pipe, into a rotating piece of machinery. These are used in numerous manufacturing processes to cool, heat, or transfer fluid (pneumatic or hydraulic) power. These are made available from our side at extremely affordable rates. These allow the feed through of water, glycol, air, hydraulic, coolant, MQL, hot oil, steam, vacuum and a variety of other media. Rotary Joints can be configured for installation at the end of a shaft or around-the-shaft.

Features:
  • Correctly defined angles
  • Multi-flow
  • Perfect thickness
  • Brand Carbon Rotofluid
  • Size Customize
  • Color Black
Get Best QuoteRequest A Callback
Air Rotary Joints

Air Rotary Joints

Product Price: Rs 800 / PieceGet Best Price

Product Details:
ConnectionFemale
MediaSteam
MaterialStainless Steel
Max Temperature250 deg C
Size1/2" to 2"
ColorGrey
BrandCarbon Rotofluid
As an ace manufacturer and supplier of Air Rotary Joints, we have marked our name very strongly in the market. These products from our end are composed of a relatively soft but tough and heat-resistant material with a high coefficient of dynamic friction (and ideally an identical coefficient of static friction) typically mounted to a solid metal backing using high-temperature adhesives or rivets. These are made available as per the set industry norms and protocols.

Features:
  • High coefficient of dynamic friction
  • High temperature adhesives
  • Jerk free operation
Get Best QuoteRequest A Callback
Rotary Joint for Steam

Rotary Joint for Steam

Product Price: Rs 5,500 / PieceGet Best Price

Product Details:
Usage/ApplicationGas Pipe
Model Name/Number101 EMS
ColorSilver
Size1 inch
MediaSteam
MaterialStainless Steel
ConnectionMale
BrandCarbon Rotofluid
Manufacturing and supplying of supreme quality Rotary Joint for Steam has helped us achieve a very high level of trust in the market. A cast-iron separator plate fits between each disc. The separator plate locates on driving pins on the flywheel. This friction unit is between the flywheel and the pressure plate when the pressure plate assembly is bolted to the flywheel. It is high on performance, low on complicated usage and extremely affordable on the monetary quotient. It has been constructed under a team of dexterous professionals who do not believe in compromising on the product quality.

Features:
  • Excellent friction unit
  • Easy to use
  • Low on maintenance
  • Brand Carbon Rotofluid
  • Size Customize
  • Color Black
Get Best QuoteRequest A Callback
Steam Pressure Rotary Joints

Steam Pressure Rotary Joints

Product Price: Rs 7,500 / PieceGet Best Price

Product Details:
ConnectionFemale
MediaWater, Steam
MaterialStainless Steel
SizeCustomized
BrandCarbon Rotofluid
Our company has earned great laurels as manufacturers and suppliers of Steam Pressure Rotary Joints. These have got an accurate thickness of finished plates and an absolute correct heat distortion temperature. This assembly has two friction discs, with friction material riveted to both sides of each. An internally-splined hub on each disc mates with the splines on the transmission input shaft. Our quality controllers stringently check the entire range to ensure its superior performance. Apart from this, client can avail these from the market at most feasible price.

Features:
  • Correct shifting of gears
  • Self-supporting in nature
  • Rust resistant
  • Brand Carbon Rotofluid
  • Size Customize
  • Color Grey
Get Best QuoteRequest A Callback
Steam Rotary Joints

Steam Rotary Joints

Product Price: Rs 3,500 / PieceGet Best Price

Product Details:
ConnectionFemale
MediaOil
Max Temperature300 Degree C
Size3/4 - 6 inch
MaterialIron
BrandCarbon
We have established ourselves as leading manufacturers, exporters and supplier of OIL Steam Rotary Joints in the market at present. The optimum carbon content in these joints ensures easier disengagement due to spring effect. These are made available to the customers at industry leading rates. These are provided as per the set industry norms and guidelines. These products from our end are manufactured using high-quality friction material that facilitates easier and smoother shifting of gears, thus assuring a jerk-free ride and optimum power transmission.

Features:
  • Single/multi-level sensing
  • Potential free contact outputs
  • Multipoint level detection
Get Best QuoteRequest A Callback
Industrial Rotary Pressure Joints

Industrial Rotary Pressure Joints

Product Price: Rs 1,500 / PieceGet Best Price

Product Details:
ConditionNew
ConnectionFemale
MediaWater, Steam
MaterialStainless Steel
Max Temperature120 degree C
BrandCarbon Rotofluid
The range of Industrial Rotary Pressure Joints which we offer is specially designed for continuous casting machines. Composed of top quality raw materials Industrial Rotary Pressure Joints are offered in various types of duo flow & mono flow systems with siphon pipe or center tubes. We offer this range in a variety of sizes, shapes, designs and dimensional specifications according to the diverse requirements of our clients.

Advantages of Industrial Rotary Pressure Joints:

  • Extra long impregnated bearing to assure easy rotation.
  • Bearing less design combines rigidity and low function for long, trouble-free service.
  • Brass housing & brass hose connector and stainless steel rotor to provide the ultimate protection against rust and corrosion.
  • Carbon rotating unions have balanced mechanical seals with seal faces that are micro-lapped to flatness of better than 2 to 4 light bands which provide the ultimate wear resistance in harsh and abrasive environments.
Get Best QuoteRequest A Callback
Rotary Joints

Rotary Joints

Product Price: Rs 3,500 / PieceGet Best Price

Product Details:
Model Name/Number501
MediaWater, Steam
MaterialStainless Steel
BrandCarbon Rotofluid
Light bands2 to 4
Max Speed1000 Rpm
The range of rotary joints which we offer is specially designed for continuous casting machines. Composed of top quality raw materials Rotary Joints for Continuous Casting Machine are offered in various types of duo flow & mono flow systems with siphon pipe or center tubes. We offer this range in a variety of sizes, shapes, designs and dimensional specifications according to the diverse requirements of our clients.

Advantages:
  • Carbon rotating unions have balanced mechanical seals with seal faces that are micro-lapped to flatness of better than 2 to 4 light bands which provide the ultimate wear resistance in harsh and abrasive environments.
  • Extra long impregnated bearing to assure easy rotation.
  • Bearing less design combines rigidity and low function for long, trouble-free service.
  • Brass housing & brass hose connector and stainless steel rotor to provide the ultimate protection against rust and corrosion.


Additional Information:

  • Item Code: 5000
Get Best QuoteRequest A Callback
Water Rotary Joint

Water Rotary Joint

Product Price: Rs 4,500 / PieceGet Best Price

Product Details:
Pressure10 bar
Max.Temperature 100 degree cel.
Size1/8 to 4
We are recognized as a successful manufacturers, exporters and suppliers of Water Rotary Joint in the market at the present scenario. An internally-splined hub on each disc mates with the splines on the transmission input shaft. These have been designed in order to increase the torque capacity, without increasing spring strength or brake diameter. These are made available as per the set industry norms and protocols. This brake assembly has two friction discs, with friction material riveted to both sides of each.

Features:
  • Accurate size
  • Low maintenance
  • Correct working angle
Get Best QuoteRequest A Callback
Rotary Union Joint

Rotary Union Joint

Product Price: Rs 4,500 / PieceGet Best Price

Product Details:
ConnectionMale
MediaWater, Steam
MaterialBrass
BrandCarbon Rotofluid
ApplicationHydraulic
UsageIndustry, Domestic
The range of rotary joints which we offer is specially designed for continuous casting machines. Composed of top quality raw materials Rotary Union Joint are offered in various types of duo flow & mono flow systems with siphon pipe or center tubes. We offer this range in a variety of sizes, shapes, designs and dimensional specifications according to the diverse requirements of our clients.

Advantages:

  • Brass housing & brass hose connector and stainless steel rotor to provide the ultimate protection against rust and corrosion.
  • Bearing less design combines rigidity and low function for long, trouble-free service.
  • Carbon rotating unions have balanced mechanical seals with seal faces that are micro-lapped to flatness of better than 2 to 4 light bands which provide the ultimate wear resistance in harsh and abrasive environments.
  • Extra long impregnated bearing to assure easy rotation.
Get Best QuoteRequest A Callback
Hydraulic Rotary Joints

Hydraulic Rotary Joints

Product Price: Rs 3,500 / PieceGet Best Price

Product Details:
ConnectionMale
MediaWater, Steam
MaterialBrass
BrandCarbon Rotofluid
TypeHydraulic
Max Pressure1.0 Mega pascal
Manufacturing and supplying of supreme quality Hydraulic Rotary Joints has helped us achieve a very high level of trust in the market. It is high on performance, low on complicated usage and extremely affordable on the monetary quotient. They connect and disconnect two rotating shafts. In these devices, one shaft is typically attached to an engine or other power unit (the driving member) while the other shaft (the driven member) provides output power for work. While typically the motions involved are rotary, linear clutches are also possible.

Features:
  • Connect/disconnect rotating shaft
  • Linear/rotary motion
  • Pressure plate assembly
Get Best QuoteRequest A Callback
Rotary Swivels

Rotary Swivels

Product Price: Rs 6,700 / PieceGet Best Price

Product Details:
Size3/4 to 10 Inch
Pressure312
Our company has established itself as a leading manufacturer and supplier of superior quality Rotary Swivels in the market at the present scenario. These are classified as push type or pull type depending on the location of the pressure plate fulcrum points. In a pull-type clutch, the action of pressing the pedal pulls the release bearing, pulling on the diaphragm spring and disengaging the vehicle drive. The opposite is true with a push type, the release bearing is pushed into the clutch disengaging the vehicle drive. In this instance, the release bearing can be known as a thrust bearing.

Features:

  • Push/pull type
  • Thrust bearing
  • Correct stroke length
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Carbon Rotofluid Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.